Window mount for Aqara G2H Pro camera

Mount/bracket to attach a camera to the frame of a sliding window.

Hardware:

• 3 x ¼" hex nuts
• 3 x ¼" screws
• 2 x M3 4mm screws
• 2 x M3 4mm inserts

Assembly:

• Place the two hex nuts into the slots in the bracket and screw in the screws from the outside
• Place the 3rd hex nut into the slot on the mount and feed the screw from the bracket to connect the bracket with the mount piece, tighten the screw
• Insert the M3 inserts into the holes on top of the mount surface, e.g. using a soldering iron to heat the insert
• Screw on the metal plate that comes with the camera using the M3 screws
• Attach the bracket/mount to the window.  Use the screw cover to prevent the screws from scratching the window frame.