Customisable battery organizer for AAAA, AAA, AA, C, D, 18650, LR44 and much more (Vase mode possible)

Battery organizer

To customise battery organizer you need to download the program from the OpenSCAD - The Programmers Solid 3D CAD Modeller website and run the tile_grid.scad file.

You will see that you have 3 groups of parameters:

1. Battery type
   1. The predefined battery type:  AAAA, AAA, AA, C, D, 14500, 18650, 21700, 26650, Coin Cell, 4LR44, LR1, CR123A, Manual
   2. Height of the battery (16mm)
   3. Height of the base (0.8mm)
2. Grid dimensions
   1. Number of columns, is set to 3
   2. Number of lines, is set to 3
   3. Wall thickness (0.4mm)
3. Manual overwrite
   1. Battery diameter, when battery type is manual it take this value, is set to 0 mm
   2. Insertion gap for the batteries to allow smooth insertion, is set to 0,2mm
   3. Gap between batteries, is set to 2 mm
4. Vase mode
   1. Default is activated

Slicer Settings:

Printer: Anycubic Kobra 2
Supports: No
Brim: Yes, separation gap of 1mm
Resolution: 0.2 – first layer: 0.2
Infill: 15% 
Filament: PLA 

Notes

These models and openscad source file can also be downloaded from github