Holding In Place Under-desk Mount for Eaton Ellipse ECO UPS

Safe space, hide your UPS and have a great cable management. These brackets will let you mount your Eaton Ellipse ECO unit under a desk or workbench. Grooves help the unit to lock in place after sliding in.

This version is specifically designed for Ellipse ECO USB version, that's because left rear bracket has additional hole for USB port. 

Shown printed models are made of ABS. Rear - red; Front - green 

Require a bit of effort to precisely mark mounting position for each bracket.

-After printing all models start with mounting one of the rear brackets. Mounting holes can be marked with ordinary pencil. Use long screwdriver to reach screws through dedicated holes.
Designed to be mounted with 4x16mm countersunk screws. Mounting holes are chamfered.

-Fit the unit in the first mounted bracket. Making sure edges of the UPS fit in grooves, adjust the second rear bracket position to fit on the second UPS corner. Then, mark the edges of the bracket, slide-out the UPS and mount the bracket using edge markings to align it.

Before screwing into wood, pilot holes can be helpful.

-With rear parts mounted you can slide UPS into place and mount front brackets in similar way, marking their position and checking the fit each time.

UPS unit needs to be mounted laying on its left side, otherwise port holes will not match.