Slynx - Singapore Lynx

Summary

Ideal Foam Blasters (IFB) is the only entity granted permission to produce the Slynx hardware and fully assembled blaster. Full disclosure, I do not earn anything from the sales. They are my appointed custodian of the Slynx design to make the blaster available to wider audience. I trust their commitment to deliver quality products and their commitment to the hobby. Pls visit their link below.

https://idealfoamblaster.com/product/slynx-blaster/

Before commencing the assembly process, ensure that you measure the actual space between the receiver and stock. Print the spacer last, following this measurement. Kindly note that the Slynx dimension is not compatible with original lynx bars as both blasters are of dimension.

To construct the Slynx, you'll need the following hardware:

1)Roboman: https://roboman.net/collections/lynx - Brass Nuts and lynx Metal Catch.
3)Slynx Spring (dimension is not compatible with other blasters). https://www.carousell.sg/p/original-slynx-spring-1268705976/

4)Flat bars - either 1/8" x 1/2" or 3mm X 13mm will work

Keep in mind that the Slynx was developed and printed on the BambuX1c, and the files may be unforgiving in terms of tolerance. Therefore, it's essential to...

PRINT THE SPACER LAST AFTER YOU MEASURE THE ACTUAL SPACE BETWEEN THE RECEIVER AND STOCK AFTER ASSEMBLY.

Spring specs:

Wire 2.2mm x OD 30mm x L 250mm x Coils 20- 270fps 

Wire 2.3mm x OD 30mm x L 250mm x Coils 20 - 300fps

I'd like to express my gratitude and credit to the following individuals for helping me in my journey in making tihs a reality:

Dan from Orion Blasters for creating the awesome Lynx.
Francis (Evolve) from 3D Print Singapore and Jonethan (Buggy) for their mentoring and technical support.

Beta testers in no particular order: Abner, JiaJun (Piggy), Abraham, Changjun (CJ), Ferry, Harrods, Joshua, KC, Nathan, Therese, Jeffrey, Bradley Phillips and Sofian.

PRINT THE SPACER LAST AFTER YOU MEASURE THE ACTUAL SPACE BETWEEN THE RECEIVER AND STOCK AFTER ASSEMBLY.