IKEA Skadis holder for ruthex soldering tips for insets and some trays for small parts

These are small holders for the ruthex soldering tips for heat insets. There are six versions:

• double row holder with hook
• double row holder with hook and text
• double row holder prepared for T-Nut
• double row holder prepared for T-Nut with text
• single row holder with hook
• single row holder with hook and text

For the T-Nut-system from 6d6178 (M3 screw) you need T-Nuts. They can be found at the T-Nut-System from 6d6178 or you use other T-Nuts like e.g. the ones i designed (T-Nuts).

As i also needed some trays for the insets i made some with hooks respectively with preparation for the T-Nut system. There are trays with 4, 6 or 8 compartments, the trays are 80mm wide. You may use the trays for other things like little screws.

Printing:

• PLA or PETG, any other material should work fine
• 3 Perimeters
• i used 15% infill
• for the hook versions i used a brim (only were the hook hits the bed), for the T-Nut version no supports are required
• Layer height: as you like, i used adaptive layer height in the slicer and it worked perfect