Voron V0 Meanwell PSU Terminal Cover (Side mount)

@loicloic made a lovely terminal cover for the V0 PSU. However it seems to rely on screwing into a threaded panel underneath the PSU - while the standard v0/v0.1 instructions have you mount the PSU directly to acrylic with a nut on the PSU side (no threaded parts). This remix changes the terminal cover to accommodate a nut at the bottom - and mounts to the PSU using a M3x5x4mm heat set insert (from the standard V0 BOM) on the right side instead.

Compatible with LRS-100-24 and LRS-150-24

Requirements

• 1 M3x5x4mm heat set insert
• 1 M3x8mm screw

Suggested Print Settings

Standard Voron print settings work well:

• 0.4mm
• 4 Walls
• 5 Top/Bottom Layers
• 40% Gyroid infill
• ABS or ASA