Marked Modular Magnetic Wrench Holders

Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly positioned 9/32 SAE Wrench in the lineup/order.

New Files are marked v2

This design utilizes ½" dia x 1/8" thick N42 rare earth magnets the same as the original but also allows for any Generic or N42 6mm x 2mm magnets often used in Gridfinity to be used also.

1/2" Magnets Link: https://www.kjmagnetics.com/proddetail.asp?prod=D82

I have an updated design of these meant for Pliers here:

https://www.printables.com/model/828043-modular-magnetic-plier-holders


---Changelog---
10/24/2024: Corrected issue with 3/8 ½" External Magnet file where on Bambulab Slicer it would show a Body Error, re-made the 3D Model to correct issues and Updated STL, STEP, and F3D Files.

10/16/2024: Corrected issue where ½" Magnet files were described as 2", corrected STL, STEP, and F3D files.