December 12, 2023
Description
This is a fanart model of the cute bat from Natural Habitat Shorts, “Batrick”🦇
The model can be printed in single colour from the .stl, or you can use the .3mf to print it in multicolour (colours were assigned using the slicer's paint tool). It is a 5 colour print, but only three colours ever print at once so it can be printed on the Bambu AMS or similar systems with one or two filament swaps.
The model in the photo was printed on a 5 tool head Prusa XL at 0.1mm layer height. I used small strips of mounting tape to hang it (the bottom is flat).
Filaments used:
eSUN PLA+: Black, Cold White, Grey
Overture PLA Matte: Chocolate, Pink
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
3DPrintDogs
