Short Microphone mount extension / adapter (Blue Yeti)

When using a Blue Yeti microphone with a generic microphone arm, the adjustment knob hits the mini USB connector. This extension allows the knob to clear the cable. 

Threaded to 5/8-27 TPI on the mic end and 3/8-16 on the stand end. More than strong enough due to the fact that the extension slides over the "pin" of the mic arm before threading in. 

As always, PETG is ideal for functional prints, but PLA or anything else will work fine. Recommend printing in 0.2mm layers with 50% infill and 3+ perimeters for strength.

Updated to be printed as a single piece.