December 5, 2023
Description
Use a cut-off wheel and cut from the edge where the port is. Then you are able to pull out the Electronics. I then DE soldered and remove the USB port. Then solder in new wire connection to the input and output. Then throw in box and close lid.
SURPRISINGLY I MADE IT SMALLER WITH MORE ROOM AS PICTURED!!!
TO ME THIS WAS AN UBELIVEABLE ACHIEVEMENT!!!
Used in Raspberry Pi IoT https://www.thingiverse.com/thing:4992092
Category: ElectronicsLicense:
Creative Commons — Attribution
10
ScottieD369
