December 5, 2023
Description
*Snap-In Fit & Snug-Fit*
This is a Relay Module with dimensions: L 53.94mm x W 72.93mm
Sorry I forgot the holes on snug version. But snap fit has holes ready!
Snap In Fit and flush mount
I also made this so that it can fit ~ 6mm Length screws. (board mount)
Lightweight & Strong Base Support!
I used Fusion 360 to design this project. It was hard working with the vectors to get it working right for the tabs. But I accomplished what I had visioned. Then my slicing software is slic3r currently. I keep my settings low. Then you get a strong durable part! I also am planning on taking this project even further and adding in support for cable tie attachment for cable management!
I hope you guys enjoy and use this!
I am sharing the Fusion 360 file!
On Adafruit Show & Tell January 27/2016 https://www.youtube.com/watch?v=03kcbBZcsLg
Other Mounts Listed:
1 Channel Relay Mount: http://www.thingiverse.com/thing:1284047
2 Channel Relay Mount: http://www.thingiverse.com/thing:1285305
8 Channel Relay Mount: https://www.thingiverse.com/thing:4992420
I have made code for Raspberry Pi Touchscreen python code https://gist.github.com/ScottieD369/0aa1ffe21cc59ade7e1899e7a8243d2f
Used in Raspberry Pi IoT https://www.thingiverse.com/thing:4992092
Printer Brand:
RepRap
Printer:
Geeetech Prusa i3 X
Rafts:
No
Supports:
No
Infill:
80%
Notes:
Print Time: 174 Minutes
Extruder: 225 Bed: 75 PLA GLUE STICK
Layer Height: 100 microns Extrusion Width: .5mm
Infill: 3D Honeycomb Outter/Inner: Hilbert's Curve
4mm Brim Skirt 1
Weight: 13.6g
License:
Creative Commons — Attribution
10
ScottieD369
