Gift Box

This is a modular gift box/ornament allowing you to print different color "ribbons”, without having a multicolor machine. Inside dimensions L44 x W44 x H34 mm. This Gift box requires no glue, screws, or hardware, the lid stays on tight due to tight tolerences. Even comes with a working, strong ornament hook!

Changes:

• 12/7/23 Added a new bow 
• 12/8/23 Made lid easier to print  no supports needed

All Objects:

.2 layer height

15 percent infill

z hop enabled

Outer “ribbons”:

Part cooling:  off to reduce stringing

Bow:

Make overhangs printable 

New Bow:

No supports needed!

Bottom:

Part cooling: ON for bridging

Lid:

Part cooling: ON for bridging

Ornament hook:

Allow build plate to cool before removing

ASSEMBLY

Supports removed:

“Ribbons” slide on from bottom of box and top of lid

Ornament insert pin goes into the underside of lid

Bow is then placed over pin

The lid is placed over top of the box, ensure ribbons are inside lid and ornament hook is looped through pin insert

You could potentially scale everything proportionally, and make it a giant gift box!