Snap-in motherboard feet (standoffs) for desktop use

Modified version with snap-in friction fit. No screws or threading required. 

The fit is a little bit tight to make sure that the feet doesn´t come lose by accident.

Update: The locking tabs were a bit too tight for modern motherboards that strictly adhere to the standards. 

If you have problems whith the tabs braking off when removing or inserting the feet, please try the “slim fit” version below. The diameter of the tabs is ~0,5mm smaller than the original ones and require the mounting holes to be Ø3,96mm/0.156" to remain in place if the motherboard is lifted up.