Hood Details for 3DSets RC Jeep Rancher (Wrangler)

I wanted to add some more details to my model, so here's what you'll find:

-Hood Flap: This is the hardest part to print, I failed a lot of prints before make it. Print it slow with raft and support, 100%infill and 0,1 layer. In the pictures you can find the right orientaion for print it.

-Hood handle: This is very small, print it with slow settings and glue it to the hood (measure before!)

-Hood tips: Measure, drill 2 holes on the hood, and use 2x M2x4mm screws to fix them.

-Hood Latches: Print them with slow settings and raft, find the best orientation on the bed. Measure, drill 4 holes, and use 4x M2x4mm screws to fix them on the hood.

-Mirror Glass: This is probably the easier part to print, I used silver PLA.

DISCLAIMER: Those aren't easy parts to print, please make sure that your printer is very well calibrated and take your time to edit your slicer to make good prints!