20º Blink Doorbell Camera Wedge Mount (REMIX)

This wedge sits between the wall and the camera mounting plate to set the doorbell at a 20º angle. You will want to print it in a material that can handle whatever elements you put the camera in, though frankly I've had good success with PLA outdoors. That said, I did mine in PETG-CF. 

The other two screw holes are there to use for mounting still, if mounting with the center screw only, you can also use a couple of slightly larger and shorter screws to attache the base to the wedge, giving it a bit more stability. 

Note: this is only usable as a right facing mount if you are using the top/bottom holes.