December 12, 2023
Description
A junction box for terminating fibre optical cable to LC or SC connectors. It has a hole for a 20mm stuffing gland, two screw holes for wall mounting, cable guides for the slack fibre, and four slots for splice protectors.
I printed in PLA with 20% infill which came well, just be careful to support the box when pushing the couplers in. The couplers push fit but can be secured with 2mm nuts and bolts if you want. You will need four 3mm countersunk screws (I used 10mm long) or small self-tapping screws to secure the lid.
If you like the model and it was useful for you, a make would be appreciated.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
Ememell
