Dyson Fan Remote Stand

Included are two models (loose and tight) and the source .step file. 
 

The loose file is a better fit for rigid filaments like PLA/PETG/ABS/ASA so the remote can be removed from the stand. 

The tight model is useful if you want to keep the stand on the remote at all times, and should be printed with a filament like TPU. In order to get a print which is heavy at the bottom, but squishy at the top for semi-easy removal and a sturdy hold of the remote:

• Print with 95A TPU
• Print with 95% infill for the first 10mm using a height modifier
• Then at 15% grid infill above that to allow some flex in the sheath area