Jig Holder for Magswitch MagJig 95

This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else.  For my use I mounted two of them to a piece of plywood to make a drill press fence.   It could also be used for other jigs on a table saw, router table, bandsaw, etc.

There are two versions:  (1) the standard size "MagSwitchHolder-MK1.STL" and (2) a version with a slightly larger hole for the Magswitch called "MagSwitchHolder-MK1-extraTolerances.STL".

Printing:

- I used an adaptive layer height, but it could easily be printed with 0.2 to 0.3mm layers.   
- 3 top and bottom layers
- 4 perimeters (for extra strength)
- 25% infill
- I used PETG as my garage gets quite hot in the summer

Mounting Hardware:
- To mount the holder to a jig (plywood in my case) I used #8 screws (4mm)
- To mount the MagSwitch MagJig 95 to the holder itself I used #6 screws that were 1" long.  (3.5mm x 25mm)

Note: I also included the STEP files to aid in modifying the design.