Coffee Filter Holder (for wave type)

A simple coffee filter holder.
Holds more than 100 Kalita wave filters.
 

Print Settings

Printer:

Prusa i3 MK3S+

Rafts:

Doesn't Matter

Supports:

No

Infill:

15～20%

Layer Height: 

0.20～0.30mm

Use the "Variable Layer Height" function if you want to print the handle of cap neatly, You may want to print it partially at 0.05mm or less.
The attached .3mf file has already set the variable layer height, so please refer to the settings.

Seam position:

Aligned is recommended. Random is not recommended because it produces messy air bubbles pattern.

Filament:

Kexcelled Black Matte

If the first layer does not adhere well, use glue.