December 15, 2023
Description
The wood on the Ikea Bror cart is not thick enough to hold screws that will fix an extention box and support the weight of plugged-in power cables and adapters. So I designed three brackets to attach the extention box to the inside of a metal side bar.
The brackets are mounted with M3x20 bolts and square M3 nuts that fit into the small hole at the back of the bracket. Washers are optional.
The 3.5 mmholes that you have to drill in the card for this particular extention box are 130 mm apart.
Printed in PLA-PHA with 0.2 mm layer height and 20% grid infill.
License:
Creative Commons — Attribution — Share Alike
egeltje
