December 16, 2023
Description
Never worry about your belt knobs vibrating themselves loose again.
Easy Install set your belts to desired tightness.
Then pop this cap over your existing one. Easy as that
20 to 25 infill / with paint on supports on on wings and inner top see pic.
Note: (The first placement of part will be tight right off the printer. But will settle in by design and be a perfect fit for your knob going on and off easily. Had to do this if people decided to use PETG over PLA. PETG is rougher at a micron level will have more friction. This is what smooths out as you use the part.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
FreshPrints
