December 11, 2023
Description
I needed to quickly plug off the end of a ¾" BSP hose on a Sunday after the hardware store had closed.
3D-printing to the rescue!
This male plug for ¾" BSP fittings (washer supply hoses, etc.) did the trick.
Print with at least 5 walls and 7 top layers for best results.
Printing with a material such as PP, PETG, ASA, or ABS will likely yield better waterproof results.
---
NOTICE: If you post remixes online --- Printables, Thingiverse, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.
License:
Creative Commons — Attribution
edgett
