Dragon Burner mount for Rebel2

I've had the Rebel2 printer for little over a year. I've taken it from close to garbage, not fully working when I first got it, printing barely at 35mm/s and 1000mm accells tops to printing now, in some cases, almost at 200mm/s with 5500mm accells. While making all those different upgrades I also wanted to change the original heavy toolhead for something lighter. I first went with Prusa MK3 clone which wasn't bad, but I was still looking for something else. Current biggest drawbacks of this machine are its heavy toolhead and its heated bed which I just can't make slide freely like a butter and it does tend to generate some unwanted vibrations during faster print speeds.

For toolhead, I decided to fit the DragonBurner on my machine, it is typically seen in smaller Voron coreXY machines. I also wanted to finally add a ABL capability to the printer because it didn't have any and so I designed the mount so that it can fit the tiny Biqu Micro Probe v2.

The X-carriage is for the 10mm rods version, but 8mm X-carriage should work as well, as long as the holes to attach the mount are in the same places.

PS: This is no longer a work in progress, but I've since changed the entire printer kinematics from classic Rebel2/Prusa style to CoreXZ similar to Voron Switchwire and because of that this assembly became obsolete.