KP3s 3.0 Heatbed cable cover with integrated PEI sheet guide

This mod for KP3s 3.0 strengthens the cable connection of the heated table and at the same time helps to install PEI (or other) magnetic sheets.

You will need two screws with nuts M3x12 and two M3x10. It is better to use M3 caged square nuts, but regular ones are also possible.

If you do not want to strengthen the cable, but only make a guide, then you can attach two identical parts to the table frame.

I recommend plastic that can withstand high temperatures (ABS or stronger). The print is mostly unsupported (possibly including a small support for the cable fastening part) with an increased number of walls, layers of the bottom and lid and 30% infill.

2024.02.03
Attention! As I found out, some mods of the fan can touch the side guide. The file Cable_cower_KP3s and PEI_guide_KP3s_top is now updated, the height of the side is reduced.