December 13, 2023
Description
I know I could just flip the spool mount to allow for a smooth feed to the direct drive upgrade I installed, but I like it coming off the spool straight down into the extruder.
See my designs section for other printer upgrades!
No support required for this print.
Print orientation provided in last photo. This gives best results and requires no support.
I printed with 0.4mm nozzle. Walls were 2mm thick and a 25% Gyroid infill.
No extra hardware required. Use existing nuts and bolts.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25% Gyroid
Filament: Hatchbox PLA Blue Custom Section ==============
Installation
Slid into the side of your printers top aluminum extrusion. See photos for correct orientation. Unscrew one of the spool mounts and loosen the other. Spin the spool mount around and line up the holes of the mount and the adapter. Insert nut and tighten. tighten down the loosened screw still in the extrusion.
License:
Creative Commons — Attribution
7
thepaperskeleton
