December 15, 2023
Description
This 2020 Attachment holds 3 SD Cards.
You will need two M5x10 button head screws Amazon Link for screws in US and two Amazon Link for nuts in US
The SD cards sits halfway into the part to allow for easy access.
Print Settings
Initial Layer Height: 0.15mm
Layer Height: 0.2mm
Line Width: 0.35mm
Wall Thickness: 1mm
Wall Line Count: 3
Infill: 10% Gyroid
Plate Adhesion: Brim (8mm brim width)
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution
7
thepaperskeleton
