Cable managers with screw holes

This is a remix of https://www.thingiverse.com/thing:1182945 made by muzz64. I loved this idea, but wanted something more permanent than double sided tape. I added screw holes to allow for the cable manager to be mounted. This secures the manager to a wall or baseboard and ensures that it will not come off.

Diameter of the cable slots are 6 mm. I have attached the .STEP files if the holes need to be widened.

All credit goes to muzz64 and if you want to tip, please go to their page.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.1

Infill:

Notes:

Since this is just holding cables there is no need to increase the fill above 10 unless you are worried about screwing them to the wall. Minimal torque is required to attach these to the walls.

Category: Electronics