Parts needed:
- 20cm width (wooden) panel. I used two cheap furniture panels with dimensions 20x80x1.8cm. These cost around 6 euro a piece.
- Screws to mount the bracket to the panel and to the wall
Instructions:
- Use the drilling template to partially pre-drill the required holes into the panel. Pre-drilling makes assembly much easier since there isn't a lot of space to apply pressure to the screws.
- Screw the brackets on to the panel
- Mount the assembled shoe storage shelf to a wall of your choice
Additional notes:
There isn't much space to tighten the screws inside the bracket. To do so I'd recommend to either use hex/allen/inbus screws, which will allow you to use a hex key, or to use a small ratchet for regular or torx bits. I personally used a little Wera ratchet and a torx bit.
milans
