Las Vegas Raiders Hueforge

Las Vegas Raiders Hueforge

I used what I had on hand

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PLA PolyLite Pro Metallic Silver Transmission Distance: 0.5
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Gray
At layer #8 (0.72mm) swap to Metallic Silver
At layer #12 (1.04mm) swap to White for the rest.
 

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o

Venmo: Dohara1985

Paypal: @Dohara1985