TCL Alto 3 Sound Bar Wall Mount

Wall mount for TCL Alto 3 sound bar. Fits perfectly, with a small gap on the back to manage cables or pass them through. Nothing special, just a clean solution!

Printing Instructions

Print in your preferred material with as much infill as you like, but here are some print settings recommendations:

• Use PLA/PETG or some other solid material
• 10% or higher infill should be plenty strong.
• Supports not needed
• Use some bed adhesion method ("mouse ears" work well, or a brim) to keep the bars nice and flat.

Once configured:

1. Print the model on its side, with no supports.
2. Take it off your print bed when it's done.
3. Install with your preferred mounting method.