LLL (Lithophane Looping Lamp)

A slightly hybrid lamp: a mix of 3D and drawing, day and night, wood and plastic, physics and digital.

"Pour toujours voyager" (“To travel forever”) or "Voyager pour toujours" (“Travel forever”) is just about never ceasing to dance round the world! :)

☀ This work has been done in partnership with Sunny Side Up: https://www.instagram.com/sunnysideupshow/ ☀

--

I used a common E14 lamp cord set found in a store (a bit like this one: https://laad.in/2XjiOAX )

You can either print the 3 feet or use standard 12mm diameter (0.47244 Inches) wood sticks as pictured.

--

This design is based on the same feet structure as another of my designs: 
https://www.prusaprinters.org/prints/26889-paper-ball-lamp

Print Settings

Rafts:
Yes

Supports: 
Yes

Resolution:
0.15 - 0.2

Infill: 
100%

Notes: 

Lamp to be printed bottom-down and feet upside-down.

Rafts: For the feet only

Supports: for the lamp only

Infill: 100% for the lamp, as you wish for the feet

Lamp takes 110g to print