Lowrider 3 Tramming straps for Makita

Three rotationally adjustable tramming shims. One large 2.25mm, Medium 1.7mm, and Small 1.2mm. 

K, It’s kind of a pain to adjusting the tram on the LR3 so…

Print two Core straps of your choice along with two each of each size of shim.  Replace the OEM straps and start with the large shim on top and small shim on the bottom. Tighten the bolts firmly and lower the cnc to check tram with the tramming tool of your choice. The farther out the diameter is of the tramming tool you use, the more accuracy you can get. Take note of how far off and to what side it’s off at.  Adjust the top shim for big movements and the bottom for smaller increments.  Loosen the bolts and rotate the shims to the direction of the “high side”.  Where the shims are, will be the lowest points of their reach. If needed, use a flat head and hammer to rotate the shims. Tighten the bolts and repeat the operation. Rotating the shims accordingly.  It’s like rotating the router tram to level…  Hope this helps.  Let me know if anyone needs these in any other format.  

My LR3 was high around 2mm at 6” on the Xmin/Ymin direction.  I ended up using the 1.7mm on the top strap and the 2.25mm on the bottom strap.  Both rotated to the Xmin/Ymin direction. Thanks