June 21, 2026
Description
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
These boxes fit exactly onto the space over the bearings of the Sunlu S4 filament dryer.
Simply dry your desiccant / silica gel at 70°C for a few hours, stir from time to time.
I recommend two boxes because air flow is better the less each box is filled.
It's mandatory to use a high temperature filament like ABS, ASA, PC or similar! PETG and PLA will not work. I tested PETG and the bottom deformed while using.
The holes/slots are 0.8mm wide.
No support needed. I used 3 walls and 4 top/bottom layers to get it stronger.
License:
Creative Commons — Attribution — Share Alike
7
schiko
