Wall mount box to hide wires

Do you have wires sticking out of your wall and you don't want to remove them? This is my case, in my new house the previous owner had installed cables for the sound system. I don't need them right now, so I designed a little box to hide them. The cover fits into the base without screws, no need for special screws.

Installation

1. Tie the wires together, follow the electrical rules
2. Screw the base - standard screw
3. Put the lid on - if too tight sand the tubes
4. Optional: paint the cover to match your wall color. 

Print instructions

• Infill: 10-15%
• Print orientation: Flat or at 45 degree for more strength 
• Supports: Depends on the preferred orientation