Micromake Effector V2 (Added top plate)

UPDATE 10/1/2016

Sorry this took forever to upload the top effector plate. I lost the solidworks part file. you can just the stock side clamp, so I can only submit the .stl. the file is modifiable to make it work, but it is a little short. Feel free to do what you want to with it. I may revisit this whole project later. From what I can tell this whole effector assembly is not the greatest setup. its crap in my opinion. I am going to design another effector with less side force during bed calibration.

Made a Micromakes Effector with the bed leveling. Its the 2nd rough draft, Im sure it will need some tweaking. But its close. my buddy printed it, that is when i found the mistake. If you print ABS you may want to upscale .07-1.0% to allow for shrinkage. I have 2 more files to upload for this. I will get those up ASAP.

(UPDATE, THIS MODEL IS REVISED, IT SHOULD BE USABLE NOW)

Print Settings

Printer:

Micromake ValueHobby special!!!

Rafts: 

No

Supports:

Doesn't Matter

Resolution: 

your choosing.

Category: 3D Printing