Darwin Evo 3D Printer

Darwin Evo is an updated recreation of the 2007 RepRap Darwin, created by Adrian Bowyer and Ed Sells, that started all of DIY and maker 3D printing.

Specifications:

• E3D Revo Voron Hotend
  • Your choice of Revo Nozzle
• BigTreeTech Electronics
  • Octopus Max EZ + TMC2209
  • HDMI7 Touch Screen
  • CAN Bus with U2C
  • RP2040 2209 CAN Toolhead boac
  • Knomi Screen
• Voron Stealthburner and Clockwork 2 Toolhead (modified aesthetics)
• RatRig inspired Z drive system
• Klipper Firmware
• 600W Mains Powered Bed
• Fully Open Source
• Build Volume 295 x 245 x 180mm (X*Y*Z)
• Acceleration 2000-8000 mm/s²

Please note STLs have not been orientated optimally so you'll need to do this yourself. In the future I'll get them orientated optimally for you.

You can access the full Bill of Materials with links here: https://docs.google.com/spreadsheets/d/1MbXX8o4P7mV-2w7rxGUYQNx91KYeHKMDVfgWpFKHHns/edit#gid=0
The linked BOM has not yet been fully tested so may be subject to some changes but this will likely be the smaller parts and screw quantities.

You can hear more about the history, story and making of the project in this video.