BLINK MINI Simple Stand (with weight in the base)

Heyho

I recently bought a Blink Mini Webcam to be able to track my 3D printer in the dark.

Unfortunately, most of the existing mounts were ugly or impractical for my problem.

So here is my quick solution. I fixed the weight to the floor with double-sided tape to make the stand more stable. (You can simply remove it from the existing mini stand)

I then attached the camera with 2 M3 screws (8-10 mm).

Have fun printing!

Print settings:

I used 4 perimeter, 30% infill & PETG as it gets quite warm in my enclosure.