Lowrider 3 Z Axis Debris Shield

Helps to prevent things from getting sucked into the Z axis screw drive and helps block debris from entering or damaging either side of the Z Axis mount.  The purple box in this photo represents a 7mm/12mm or .25in/.5in adhesive Door Brush Seal.  There are two adjacent flat platforms on the inside of the Z Shield for the door brushes.  This helps to prevent debris from entering through the front.  Tolerances are tight so install the shield slowly by fitting the holes to the bolts then ease on the top. Rock the shield on slowly from top to bottom until it comes to seat. It can also be printed at 101% for a looser fit.  Print two of each file, one set printed Mirrored with tree supports where needed.  Thanks