Universal bottle/bidon holder with fidlock twist mechanism

bottle holder with fidlock twist mechanism, NOT COMAPTIBLE with original fidlock base. 

BOM:

1. 250-350mm Reusable cable ties with 8mm wide ==> aliexpress
2. m3 3mm heat set insert
3. m3x10mm screw
4. 10x3mm neodymium magnet
5. 3m double tape

For embeded version, you have to pause mid print and insert the magnet. 

There is 2 connector version, right twist or left twist. choose according to your preference.

Unlike original fidlock where you can attach the connector from the front, this can only be attached using twist like when you detach it. twist for detach and attach.

Use 3m double tape for Universal module bottle adapter for better grip to the bottle.

The fidlock base pivot (center cilinder part) is fragile, if you want stronger one, use the fidlock modular base version, that use screw and heatset insert.

Print setting:

you only need support on the cable ties hole. every other setting is up to your preference. I already give some size tolerance, if it is tight, set your slicer setting.  

NOTE:

After I print and assembly all the part. 10x3mm magnet is not that strong. Maybe you can try using bigger and thicker magnet. But you have to remix it yourself. I provided all the step file. I am done playing with this.