Christmas village

Another chrismass village.

Houses and chruch can be used alone to make village even bigger.

For illumination of only one house you can use single led light like this: https://www.printables.com/fr/model/289171-2025-coin-cell-battery-led-light/comments

For illumination of the village you can use led strip with adapteur (there is a hole at the back of the base for wire).

Update 26/12/2023:

Model works very good with standard PLA but with PLA wood (Geeetech) is difficult to print on my MK3S+ with standard 0.4 nozzle. I print (show on photo) with 0.6 nozzle and layer height of 0.3mm. The result is not very satisfing (under extrusion, stiring, dimentionnal,…).