YubiKey 5C holder for BYZANTINE Vault

This model is based on the BYZANTINE Vault customizable design template. Thank you very much for providing the design data. Als a huge thank you to Emiel for sharing his design of a YubiKey 5C which makes the casting process much easier. 

To print, simply select the model with the required number of slots (1-3) and print. I have had good results with a 0.4 mm nozzle and a layer height of 0.2 mm. 

The material does not really matter for the bracket itself. However, I suspect that a filament with a high heat deflection temperature property provides better protection against the holder fusing with the YubiKey when the Byzatine Vault heats up. However, please also take into account the maximum ambient temperature of the Byzantine Vault which is currently lower than HDT of PLA.