Vacuum 35mm to 35mm junction (straight/angled)

Many of my power tools have 35mm outlet, requiring some sort of joiner to connect to my 35mm vacuum hose. I made both straight and angled to fit various power tools.

You want to print with PETG here, 3 perimeters and I recommend enabling ‘Avoid crossing perimeters’ to avoid stringing inside the tubes.

Unfortunately, I noticed those 35mm are more like recommendation for vacuum manufacturers so I can't promise it will fit ‘em all. Sized like this it’s quite a snug fit in my case. You can try to flip the adapter in case there is too much free play, there is a slight diameter difference between both ends. Or to use some tape.