January 12, 2025
Description
Designed up this bank to fill it up with money I earned from 3D-printing and buy new filament from it! You can print the euro version, the dollar version or the pound version. All three are identical only the symbols are different.
I also designed three different bases. Just print the base you like the most. The base and the cap are screwed together.
What you need:
1x M8x20 bolt (DIN EN ISO 4762)
1x M8 nut (DIN EN ISO 4032)
Printing:
I used a special design technique so you only need support for the locking mechanism of the cap.
Resolution: 0.2
Infill: 20%
Filament: PLA
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Jens
