Death from Sandman - Hueforge

This is a relief of Death of the Endless from the Sandman comic series.  It was made using fan art, so no commercial use.  Because black is actually the bottom layer, the effect with the hair and outlines being both “above" and "below" the rest of the face is very cool.

While it may not look like it at first glance, this is a 5 color print, and the color really do add a lot of subtle detail and highlights in the small areas of the print.  The filaments I used and Hueforge color change layers are listed below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Bambulab Metal Cobalt Blue Metallic Transmission Distance: 1
PLA Inland Shimmer Dark Red Transmission Distance: 3
PLA Jessie Beige Transmission Distance: 4
PLA Inland White Transmission Distance: 4.5

Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Cobalt Blue Metallic
At layer #17 (1.44mm) swap to Shimmer Dark Red
At layer #19 (1.6mm) swap to Beige
At layer #21 (1.76mm) swap to White for the rest.