October 21, 2021
Description
A Mini conveyor powered by a 12V motor.
Model was designed for how my printer is currently working. I have made all holes slightly too big. I only used supports on the motor torque arm(Reactie arm).
I used 8mm flanged ballbearings (inside diameter 3mm) Width 2,5mm. Commonly used in Airsoft.
The motor is from Ebay:
Mini 12V DC Motor Full Metal Speed Reduction Gear Motor 60RPM with Pull Wheel
Axle is 3mm and all bolts etc are M3.
Belt was printed as 1 loop of Ninjaflex. The rest printed at 0,1mm in PLA.
License:
Creative Commons — Attribution
LC
