August 15, 2025
Description
Bring medieval flair and rolling power to your tabletop games!
The Vogland Castle Dice Tower prints support-free and delivers epic rolls for Dungeons & Dragons, Pathfinder, and other RPG adventures.
🏰 Designed for fast, easy printing — no messy cleanup, no supports.
🎲 Compatible with standard RPG dice sets (D20, D6, etc.).
🖨 Prints in parts for easier handling and beautiful finished detail.
📦 Tip: Print in stone-like grey filament for a truly ancient fortress look! Expand your Vogland Orc Warband and complete the set: View the full collection
💥 Follow VogMan for more creative prints, tabletop props, and DIY projects!
🎥 YouTube: @VogMan
VOGLAND CASTLE / TOWER
After making a 32mm Castle Tower (HERE), I received requests to turn this into an equally detailed dice tower. So it's still the same structure, with arched windows and arrow slots, but it now contains a twisting internal tube that shakes up dice.
👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈
DICE SIZE
The dice pass through the castle doorway and this is 20mm wide, so your dice must be this size or smaller - unless you want to scale up the model, which is possible as there's plenty of detail here. For example, multiply all files 116% to increase the door opening to 23mm, which should be more than big enough for a 20-sided dice. 125% for 25mm, etc.
SECTIONS
For convenient printing on both Resin or FDM, the tower is divided into stackable sections. Thanks to stud and socket design, these should fit together securely. These sections can be glued or kept separately.
I've also included witness marks to make alignment obvious, so 1 goes to 1, 2 to 2, 3 to 3.
IMPORTANT – RESIN PRINTING
There are a lot of projections on these models, thanks to the rough surfaces of the stonework. Whilst I have strived to ensure that these should print without supports (if printed parallel to the build plate), it’s possible some artifacts may occur upon the FEP and in the resin. For this reason I recommend after EVERY print, filter the resin and clean the FEP.
FDM
No supports are needed. Just place the file flat of the plate and it will print happily. It printed easily for me with a standard 0.4 nozzle, 0.200 layer height, 15% infill.
RESIN
Resin printers can print without supports. Just place the file flat of the plate. However, this may produce a "tidemark" on the finished prints. This is something that happens with resin printers and is not the fault of the design. To avoid this I would recommend pitching the model at least 2.5 degrees on both the X and Y, then support as necessary.
JUST ONE STIPULATION... if you feature this in Social Media, please name me and provide a Link to this file AND to my YouTube Channel
LEGALITIES & USE
©Copyright VogMan December 2023. Please respect my copyright / authorship. These files are strictly for personal use. No commercial use is allowed. Do not sell or otherwise distribute this work.
COMMERCIAL LICENSES
Registered VogMan Patron Commercial License holders may print and sell this item in strict accordance to the registered license. However, the digital files remain the property of Vogman and the Commercial License does not permit selling, distributing, modifying, or sharing digital files. In short, The STLs remain the exclusive property of VogMan.
If you do not hold a Registered VogMan Commercial License, then you are legally restricted to Personal Use only.
For more details about my commercial licensing, click here.
FIND ME ON...
https://linktr.ee/vogman
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://rumble.com/c/VOGMAN
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy
http://www.vogman.co.uk
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
VogMan
