Lightweight Pi Mount for Bastion Printer

The Bastion printer provides mounting holes for the MKS Monster8. This mount allows you to attach your single-board computer as well while leaving enough clearance at the top, bottom and between the PCBs.

There are files for the Raspberry Pi B-series (and compatible SBCs like most of the Radxa ROCK models), the Orange Pi 5 and the BTT Pi.

If you are using a different SBC, drop me a line and I'll add try to add a mount for it.

Required Hardware

4x M2.5 screws with a length of up to 10mm.

Printing Instructions

Print the mount matching your SBC and four spacers for the Monster8. Use 5 perimeters/walls if you are using a 0.4mm nozzle. You can set infill to 0%.

Updates

2024-02-27: Change the orientation for the RPi and the BTT Pi. Previously there was not enough room for a lot of USB plugs.

2024-01-01: Add model for the original Mellow Fly Pi.