December 23, 2023
Description
The frame is made to print laying down flat and will not need supports. Slide the frame into the main body. A little glue may be needed to hold the slide in the frame.
Print as many dividers as needed.
I will be adding a larger divider in the near future.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
PolyMaker PLA+
Notes:
The frame is made to print laying down flat and will not need supports. Slide the frame into the main body. A little glue may be needed to hold the slide in the frame.
Print as many dividers as needed.I will be adding a larger divider in the near future.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
tanders
