Dillon RT1500 Vacuum Adapters

Need this item but lack a printer? Check it out at my store through the following link:

TACustomDesign Etsy Store

I've held back from listing the final enhancements made to the adapter as they are exclusively available in my store.

Dillon RT1500 Vacuum Adapter

I've crafted an upgraded version of the standard RT1500 vacuum adapter.

To optimize airflow, the rear end has been altered with vent slots, improving air draw and minimizing vacuum bogging issues.

This adapter employs #6-32 machine screws instead of hex socket screws due to spatial limitations, which were a concern with the standard Dillon unit.

If you need a custom-sized vacuum port, drop me a message below, and I'll strive to fulfill your requirements.

File Description

• standard_back.stl: Closed back design similar to the stock Dillon
• modified_back.stl: Rear end with vent ports for enhanced airflow and reduced vacuum bogging
• standard_vacuum.stl: Standard Vacuum side akin to the stock Dillon (Inner Diameter - 25.75mm/1inch, Outer Diameter - 31.75mm/1.25inches)
• 1_25_inch_OD_vacuum.stl: Vacuum side with an Inner Diameter of 1.25 inches for a vacuum hose with an Outer Diameter of 1.25 inches
• 1_75_inch_OD_Vacuum.stl: Vacuum side with an Inner Diameter of 1.75 inches for a vacuum hose with an Outer Diameter of 1.75 inches
• 2_25_inch_IDD_Vacuum.stl: Vacuum side with an Inner Diameter of 2.25 inches for a vacuum hose with an Outer Diameter of 1.75 inches
• centec_vacuum.stl: Vacuum side that adapts to a large cen-tec adapter

Change Log

• 3/21/2021: Added 1.25" vacuum hose adapter
• 3/23/2021: Added 1.75" vacuum hose adapter and cen-tec adapter
• 5/9/2021: Added 2.25" vacuum hose adapter