Spring loaded PCB holder with magnetic stand

Spring loaded PCB holder with magnetic stand.

When assembling, start with mounting the magnet and 12mm screw. It will limit the depth of the 30mm screw.

Insert the 30mm screw into the top print. You can fix the top print with a drop of glue.

Put on the last printed part and the spring. 

Last step is to screw it together :)

This can also be used without the magnet. You will not need the 12mm screw without the magnet.

Following hardware needed:

• M3x30 DIN912 (Cylinder head) 
• M3x12 DIN7991 (Countersunk head)
• Spring 0,7 x 9 x 15 mm
• Countersunk Ring Magnet N52 15 x 3 x 4 mm

Constructed with FreeCAD